The Scooter Station is designed to be mounted to the wall using four screws. Depending on the structure of your wall, you may need to use wall anchors.

As long as you can run an extension cord to it, the Scooter Station can be installed anywhere you'd like to park your scooter, ebike or other small electric vehicle. We recommend installing the Scooter Station so that its bottom is around 27 inches above the floor.

The charger adapter is housed within the Scooter Station with the charging cable hanging out through an opening in the bottom. Just feed the charging cable through this opening as you drop the adapter in.

The Scooter Station's S-shaped coupler hangs from a retractor and secures the charging cable so that it will be retracted when unplugged. Just rotate the coupler's cover relative to its base, route the charging cable through the base, and rotate the cover back into place.

The ideal positioning of the coupler on the charging cable will depend on the installation height of the Scooter Station. Adjust this positioning so that the charging cable is off the floor when retracted.

If you mount the Scooter Station near an outlet, you can simply plug the charger's power cord into the outlet and route the power cord into the Scooter Station through any of the three openings.

If you need a few extra feet or want a cleaner look, consider the Scooter Station extension cord. Of course, you can use any extension cord you may have available.

The Scooter Station extension cord is specifically designed to facilitate interconnecting multiple Scooter Stations so that you don't need to use a power strip or run multiple extension cords to the outlet.

Multiple Scooter Station extension cords can be daisy chained as necessary. However, to avoid overloading the extension cord, you should not power more than four charging cables through the same extension cord.